AFG 3.0 AE Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Aparelho Elíptico AFG 3.0 AE. AFG 3.0 AE 20 páginas.
Também para AFG 3.0 AE: Manual do utilizador (20 páginas)

Imprimir página

ASS E MB LY ST EP

4.0 AE SHOWN

PEDAL ARM COVER

SCREW (T)

A) Open HARDWARE BAG FOR STEP 7.

B) Attach PEDAL ARM COVER into LEFT PEDAL ARM using 1 SCREW (T).

C) Repeat on other side.

D) Attach the INSIDE and OUTSIDE ELBOW COVERS to the right LOWER LINk ARM using 2 BOLTS (U).

E) Tighten the ELBOW COVERS together at the front using 1 SCREW (V).

F) Repeat on other side.

HARDWARE BAG FOR STEP CONTENTS :

SCREW (T)

15 mm

Qty: 2

3.0_4.0 AE_Rev.1.6.indd 14-15

SCREW (V)

ELBOW COVERS

LOWER LINK ARM

BOLT (U)

SCREW (V)

8 mm

10 mm

Qty: 4

Qty: 2

ASSEMBLY STEP

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

A) Attach the CONSOLE MAST wires to the CONSOLE wires.

B) Carefully tuck the CONSOLE MAST wires into the CONSOLE MAST before attaching the CONSOLE.

DO NOT PINCH WIRES!

C) Attach CONSOLE to the CONSOLE MAST using the 4 PRE-ATTACHED SCREWS.

YOU' RE FINISHED!

CONSOLE

CONSOLE WIRES

PRE-ATTACHED SCREWS

CONSOLE MAST

8/27/07 3:36:41 PM