DAYTEK M38 Manual do produto - Página 10

Procurar online ou descarregar pdf Manual do produto para Electrodomésticos DAYTEK M38. DAYTEK M38 12 páginas. Mk2 rotary clotheslines

HOW TO RESTRING/REPLACE THE LINE ON YOUR DAYTEK ROTARY CLOTHESLINE

ARM 3

ARM 2

A. Tensioner Block Bottom –

recessed into the arm of the

clothesline.

B. Tensioner Block Top –

positioned on top of the

bottom block.

TO REPLACE A LINE ON YOUR DAYTEK ROTARY

CLOTHESLINE, YOU MUST REMOVE THE TENSIONER

BLOCK TOPS OFF THE AFFECTED LINE.

To remove the Tensioner Block Tops

1. Place your index finger on top of the Tensioner

Block and over the Nut to ensure that the Nut is

held in position.

2. Undo and loosen the bolt from under the arm of

the clothesline. Once the bolt is fully loose, you can

carefully remove the Tensioner Block Top & Nut.

C. Bolt – head of bolt under

the arm of the clothesline.

D. Nut – seated in the top of

the line tensioner.

3. Remove the line from the Tensioner Block.

4. Work your way around the clothesline

removing all four Terminal Blocks Tops

and the line.

ARM 4

ARM 1 – LINE END