Dynacord DMM 4650 Informações técnicas - Página 16
Procurar online ou descarregar pdf Informações técnicas para Equipamento de música Dynacord DMM 4650. Dynacord DMM 4650 19 páginas. Signal processor
Imprimir páginaIn case you want to give the new sequence its own name, you have to follow this procedure:
Pressing the indicated cursor key enters the title-menu.
Pressing the soft key "ok" prepares the system for the
entry of a new name.
The name ("Vierklng") with a maximum length of eight
characters can now be changed as desired. Using the
soft key "A-a" lets you choose between the upper and
the lower character set. By pressing the "spc" (space)
key you can enter spaces. The blinking cursor indicates
which character is going to be changed and using the
two "horizontal" cursor keys lets you select adjacent
characters.
Using the two "vertical" cursor keys, the desired
characters can be selected. This example uses the
name "Dreiklng".
After you have entered the desired title, pressing the
"EXIT" key once displays the question "save?". Press the
soft key "yes" to save the selected name for the
sequence 05.
After showing a short message that the
storing was successful, the display
returns to the title-screen of the
sequence.
Pressing the "EXIT" key once lets you return to the main
menu.
This concludes the programming of your new procedure. The priority level of the sequence has not
been altered and is therefore equivalent to the setting of S 25 (4-tone gong signal).
You want your new sequence to be triggered by pressing the desired button on port B input 4. Thus,
the programming is performed in the "Trigger" menu.
Pressing the indicated cursor key enters the trigger
menu. Press the "ok" button to acknowledge your
selection.
The display shows that the input 1 of the port A is
disabled.
Pressing the indicated cursor key selects the port B. In
the bottom line of the display, the setting for port B, input
1 is shown.
Pressing the indicated key sets the cursor to the number
mark of the input.
Naming The Sequence, Title
Sequence
saved
Setting The Trigger
Ù
Sequence
Ø
×
Ú
Ù
Sequ title
Ø
×
'Vierklng'
Ú
Sequ title
'Drerklng'
Ù
Sequ title
Ø
×
'Dreiklng'
Ú
Sequ save
EXIT
Sequence
EXIT
Main-Menu
Sequence
Ù
Main-Menu
Ø
×
Ú
starttrg A.1 set
off
Ù
starttrg B.1 set
×
Ø
H >00,1s dyn S23
Ú
Ù
starttrg B.1 set
Ø
×
H >00,1s dyn S23
Ú
title
ok
A-a
spc
A-a
spc
A-a
spc
y
to S05
n
title
ok
ok
Trigger
ok