Dynacord DMM 4650 Informações técnicas - Página 9

Procurar online ou descarregar pdf Informações técnicas para Equipamento de música Dynacord DMM 4650. Dynacord DMM 4650 19 páginas. Signal processor

Imprimir página

The name ("Message") with a maximum length of eight

characters can now be changed as desired. Using the

soft key "A-a" lets you choose between the upper and

the lower character set. By pressing the "spc" (space)

key you can enter spaces. The blinking cursor indicates

which character is going to be changed and using the

two "horizontal" cursor keys lets you select adjacent

characters.

The "vertical" cursor keys select the character that is

going to be entered at the cursor position. The example

shows the message 'Test 1.'.

After you have entered the desired title, pressing the

"EXIT" key once displays the question "save?". Press the

soft key "yes" to store the selected name for the

Message 03 into memory.

The display shows the starting menu for the message

programming.

Pressing the "EXIT" button once lets you return to the

main menu.

Creating a procedure, the newly defined message has to be included into a sequence (page 23). In this

example the sequence-preset S 27 is chosen as the root-preset for further programming (page 39).

Press the "right" cursor key three times so that the

display reads as indicated. Using the soft key "ok" gets

you into the "Sequence" menu.

Pressing the soft key "ok" once again shows a menu that

lets you select a sequence-preset.

A blinking "0" (cursor) is displayed in the lower line.

Press the "up" cursor until the reading shows "S 27".

To acknowledge your selection press the "yes" key.

Since the procedure has to be changed in accordance to

the new requirements, you have to select its listing by

pressing the "ok" key.

The first step (step 1) of the S 27 listing is displayed.

Here, you have to change the relay output (indicator

lamp) from port C relay 1 to port A relays 2.

Press the indicated cursor key twice to have the "C"

blink.

Press the indicated cursor key twice to select port A.

Programming A Control Sequence

Messg title

'Message '

Messg title

' essage '

Messg title

' Test 1 '

M03' Test 1 '

EXIT

save?

M03' Test 1 ' vl

mm:ss.s

EXIT

Main-Menu

Sequence

Sequ load

S20 'stop all' n

Sequ load

S27 'Message1' n

Sequence

steplist

1:OutC.1 set

steplist

1:OutC.1 set

steplist

1:OutA.1 set

A-a

spc

A-a

spc

A-a

spc

edt

Message

load