Daytona DJS12TBK Manual do Proprietário - Página 3

Procurar online ou descarregar pdf Manual do Proprietário para Valetes Daytona DJS12TBK. Daytona DJS12TBK 8 páginas. Double locking pin jack stand
Também para Daytona DJS12TBK: Manual do proprietário e instruções de segurança (8 páginas), Manual do proprietário e instruções de segurança (8 páginas), Manual do proprietário e instruções de segurança (8 páginas)

Assembly

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this

manual including all text under subheadings therein before set up or use of this product.

Note: For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagram near the end of this manual.

1. Secure the chain to the jack stand by attaching the

split ring to the Hole near the Pawl. See Figure A.

2. Turn Post so that the teeth on its side face

the Pawl. Insert Post into the Base.

3. Bend Stop Tab in to secure the Post

into the Base. See Figure A.

CAUTION! Be alert to pinching hazard

when lowering the Post.

CAUTION! TO PREVENT INJURY: Before

using the Jack Stands, make sure the Post

cannot be pulled up and out of the Base.

4. Repeat Steps 1 through 4 with the other Jack Stand.

Jack Stand

For technical questions, please call 1-888-866-5797.

Stop Tab

Figure A

Pawl

Split Ring Hole

Split Ring

Page 3