Dynacore DW-500B Series Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Transmissor Dynacore DW-500B Series. Dynacore DW-500B Series 9 páginas. Sdi/hdmi 150m wireless transmission system

Imprimir página
Cautions
Wireless Transmission System
Input video port selection
of transmitter
The transmitter has a 3G SDI video input port and a HDMI
video input port, and the system will detect valid video
source automatically of 3G SDI and HDMI port, and then
switch it as main video input channel. If both 3G SDI and
HDMI have valid video inputs, the system will take 3G SDI
input as priority.
RSSI indicators
The receiver will calculate received DW-500BR signal strength
internally and 4 'RSSI' LEDs will be used to indicate wireless
signal power and quality. The user can observe the 'RSSI'
LED status to know if the current wireless link is reliable or
not.From 2 to 5 lit LEDs show 'RSSI' from Min to Max.
5
4
3
2
1
Lit RSSI LEDs Volume
Wireless Link Quality
5
3-4
2 or no lit LED
*Note:1 LED yellow for POWER/VIDEO
PAGE 10
Video Quality
Strong
Best
Middle
Good
Weak
Visible Video Noise
Wireless Transmission System
Frequency selection and configuration
The wireless suite can work in 5.1-5.9GHz frequency band
and be flexibly software configured to licensed or ISM band
of global different regions, as well as the side panel of both
transmitter and receiver has been installed a frequency
channel display screen and frequency select button,
which provide maximum 10 workable frequency channels.
See below frequency knob figure.
Frequency point in detail
Dial Channels
Frequency
Channel 0
5550 MHz
Channel 1
5590 MHz
Channel 2
5630 MHz
Channel 3
5670 MHz
Channel 4
5150 MHz
Channel 5
5190 MHz
Channel 6
5230 MHz
Channel 7
5270 MHz
Channel 8
5310 MHz
Channel 9
5510 MHz
*Note: All channels provide the central frequencies;
Bandwidth is 40MHz for each channel.
PAGE 11