Dynacore DS-130SI Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Bateria Dynacore DS-130SI. Dynacore DS-130SI 4 páginas. Rechargeable battery pack

● If use external charger, charge time may vary depending on chargers and conditions.

Approximate charge time with Dynacore 2-channel chargers:

Model

DS-95SI

DS-95AI

DS-130SI

DS-130AI

DS-150SI

DS-150AI

Discharging Dynacore Battery

● The battery usually holds 50% of its capacity when dispatched from the factory

and can be used at once. It can reach full capacity after fully charged and

discharged for at least two times.

● The battery pack can be used in ambient temperature of -20℃~50℃. It must be

noted however that, while Li-ion performs better in lower teperature than other

battery chemistries, the operating time will still be shorter in lower temperature

conditions. It will also vary with the power consumption of the equipment

connected and the condition of the battery. If temperature of the battery itself is

below -20℃, discharge may stop.

● The voltage range of Dynacore battery pack during discharge is 13V-15V and

stable. At the end of discharge and below 13V the voltage drops sharply. For

optimum use therefore, it is recommended to set the camera battery alarm

voltage at approximate 13V in the video camera manual. Refer to the specific

camera manual for its recommended alarm setting.

Model

DS-95SI

DS-95AI

DS-130SI

DS-130AI

DS-150SI

DS-150AI

Battery Capacity Display LEDs

● Five-step LED power status indicator shows accurately remaining battery capacity

by percent.

Capacity (Wh)

130

150

End Voltage (V)

Approximate charge time

2h30min

3h20min

Maximum discharge Current (A)

3.5