EmergoPlus EM010001NL Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Acessórios para câmaras EmergoPlus EM010001NL. EmergoPlus EM010001NL 17 páginas. Lifepo4 battery
Imprimir página
Tab U.I.T.C tab:
Voltage meter
Current meter
Temperature
Cycle life:
voltage
Temperature
Number of
charging
cycles
The UITC info shows 2 "meters", on the left the battery voltage and on the right the current. This can be the charging
current or the current drawn from the battery. If the battery is connected to a charger but at the same time power is
requested by users, the resulting current is displayed.
Temperature of the cell pack. If the temperature is too low or too high, a safety device is activated.
Cycle Life shows how often the battery has been discharged and recharged. 4 x 25% discharging and charging also
counts as 1 cycle.
System Info tab:
System info contains messages about events that occurred during the charging or discharge process. This refers to
the following events:
Short circuit
Lift up short circuit
High temperature at charging
High temperature at discharge
Low temperature at charging
Low temperature at discharge
Overcurrent when charging
Too much current when discharged
High Voltage
Low Voltage
Temperature/Voltage/Current back to normal
Display remaining charge time
© 2021 EmergoPlus B.V.
Terminal voltage of the battery in V
Present current consumption in A
Temperature of the battery cells
Number of charge/discharge cycles
All rights reserved.
DOCUMENT: E09-X20&X30 V2.0-EN03_Handleiding
Current
charge or
discharge
Page 9 of 16
Date: 10-2-2021