Dynacut MDE Manual de operação - Página 15
Procurar online ou descarregar pdf Manual de operação para Sistemas de lubrificação Dynacut MDE. Dynacut MDE 17 páginas. Minimum quantity lubrication system for external lubrication
Imprimir página
Switch off the system
The minimum quantity lubrication is set in the reverse order of commissioning.
Maintenance
DYNACUT minimum quantity lubrication systems are low maintenance. However, to ensure
proper operation and to avoid dangers from the start, you should check all connections and
connections regularly.
Cleaning
Cleaning outside:
If necessary, the minimum quantity lubrication system can be cleaned with mild, material-
compatible (not alkaline, no soap) cleaning agents.
For safety reasons, we recommend that the minimum quantity lubrication system be
disconnected from the compressed air and electrical voltage supply and that the container
must be depressurized. When cleaning, connect the hoses as far as possible and close any
openings so that no cleaning agents can penetrate into the interior of the minimum quantity
lubrication system.
Cleaning inside:
In normal operation and when using lubricants which are compatible with each other, an
internal cleaning is not necessary. If an incorrect or dirty lubricant has been accidentally
filled, an internal cleaning of the lubricant reservoir must be carried out.