DaytonAudio Class-T Instruções - Página 2

Procurar online ou descarregar pdf Instruções para Amplificador DaytonAudio Class-T. DaytonAudio Class-T 2 páginas. Digital audio amplifier module

Imprimir página
DaytonAudio Class-T Instruções
Assembly:
Remove the amplifier PCB from the static protective
sleeve using static protective gloves or wrist band
Solder the speaker wires to the PCB at points "A & B"
There are polarity marks (L+/- R+/-) printed on the bottom
o
of the PCB
Solder the power leads (if desired) at point "C"
There are polarity marks (B+/B-) printed on the bottom of
o
the PCB
Plug the LED ribbon cable into the white two-pin socket
at point "D" and mount the power indicator LED
Polarity: the anode (+) lead is long, the cathode (-) is short
o
Clip the leads of the LED to the desired length
o
Plug the black LED socket onto the LED leads;
o
anode to red wire and cathode to black wire
Refer to this diagram if for correct polarity
Wrap each speaker wire through a ferrite core; one wrap
per core is all that is required
Solder the speaker wires to the speaker terminals
Solder an output capacitor across the speaker terminals
in parallel with the speaker wires
Connect power via the power leads or DC power jack;
we recommend a 12VDC, 2000mA power supply similar
to Parts Express model 120-052
Mount the volume control in the desired location and
connect to the amplifier PCB using the 12" ribbon cable
Mount the PCB using adhesive pads or with a zip tie
www.daytonaudio.com
Features:
Class-T architecture
"Audiophile" Quality Sound
0.03% THD+N @ 9W, 4Ω
o
0.10% IHF-IM @ 1W, 4Ω
o
11W @ 4Ω, 0.1% THD+N
o
6W @ 8Ω, 0.1% THD+N
o
High Power
15W @ 4Ω, 10% THD+N
o
10W @ 8Ω, 10% THD+N
o
High Efficiency
81% @ 15W, 4Ω
o
90% @ 10W, 8Ω
o
Dynamic Range = 98 dB
Over-current protection
Over-temperature protection
Package Contents:
(1) Class T Digital Audio Amplifier PCB
(1) Volume control PCB with 12" ribbon cable
(1) LED power indicator with ribbon cable
(2) 12" Speaker Wires (Red & Black)
(2) 12" Power Wires (1 Red & 1 Black)
(2) 12" LED Wires (1 Red & 1 Black)
(2) Ferrite Cores
(2) Output Capacitors
www.daytonaudio.com