DaytonAudio MA1240A Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Amplificador DaytonAudio MA1240A. DaytonAudio MA1240A 4 páginas. Twelve channel multi-zone amplifier
Também para DaytonAudio MA1240A: Manual do utilizador (4 páginas), Manual do utilizador (4 páginas)
Imprimir página
Thank you for purchasing the Dayton Audio
MA1240a makes it the perfect choice for almost every type of custom multi-room audio system. Its tabletop or rack-
mountable design allows it to be integrated easily into high-end whole house audio systems.
FEATURES:
quality and performance
when needed
each speaker to be perfectly matched
INSTALLATION:
Dayton Audio amplifiers are designed to help deliver a great audio experience. However, where you place the amplifier can
have a large effect on the performance you receive, and the life of the unit. If you are not rack-mounting the amplifier, posi-
tion it with all feet resting on a solid level surface. Be sure that the amplifier is in a well-ventilated area and DO NOT install
the amplifier near a source of heat or in an extremely humid or wet location.
CAUTION: All connections and switching must be done with the amplifier's power switch positioned to 'Off'. Connect the
power cord last to be sure that the amplifier is off during all of your connections and set up.
FRONT PANEL:
1. Master Power Switch / Indicator LED
Front panel pushbutton power switch turns the amplifier
on and off. When the switch is on and the indicator LED
is red, the amplifier is in standby mode. The remote turn
on switch (located on the rear) is either in the "trigger"
or "auto" position. When the LED is blue, the amplifier is
fully active. The master power switch will turn off the am-
plifier no matter which power mode has been selected.
2. Zone Status Indicators
MA1240a Twelve Channel Multi-Zone Amplifier. The versatility of the
®
automated system
troubleshooting of audio system
tabletop configurations
indicate its operational status. These indicators provide quick
and easy troubleshooting of the system. If the circuitry deter-
mines that a channel must be shut down due to excessive
heat or low impedance (a short), only the channels that are
blue LED status. Once the condition has been corrected for
Note:
are not lit (off) indicates the unit is in stand by mode.
(2)