Greater Goods GBF-1719-B/0383 Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Balanças Greater Goods GBF-1719-B/0383. Greater Goods GBF-1719-B/0383 11 páginas. Body fat analyzer
Initial Start-Up
Insert the Batteries
Open the battery door in the back of the scale.
Remove insulating strip from beneath the battery (if
fitted) or insert batteries (3 x 1.5V AAA) observing the
polarity signs (+ and -) inside the battery compartment.
* All the digits will be shown on the LCD.
Close the battery door and wait until the digits
"0.0lb" are shown on the LCD.
CAUTION
When the symbol "Lo" appears, the device will power off in three seconds. Then you shall replace with a
new set of batteries. Please replace all three batteries at the same time. Do NOT mix the old batteries with
the new one.
Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.
Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries.
Select Measurement Unit
With batteries correctly installed, press UNIT button in the back of the scale to select
measurement unit. The default measurement unit is "lb". You may press UNIT button
to choose between pound and kilogram.
6
Install App and Pair-Up
With the advanced Bluetooth 4.0 technology applied, the mobile or portable equipments,
which are equipped with Bluetooth function in line with BLE Technical Specifications as
well as BLP Protocol established by global organization Bluetooth SIG, are capable to
receive your personal health data.
Before you use the smartphone which supports Bluetooth 4.0 technology, please turn
on the Bluetooth.
Register an account and set your personal information. Then you can pair up your scale
with your smartphone through the following steps:
A. the mobile phone is connected to the network and the bluetooth is turned on.
B. Then open the customer APP.
C. In the "TES AFP" page, click "SCAN", and then click "CET DATA" to enter the
production connection bluetooth.
D. If the device is connected by bluetooth of other mobile phones, the device needs to be
disconnected from other mobile phones to be successful in the search binding.
Initial Start-Up
7