DaytonAudio MKBOOM Manual de montagem - Página 5

Procurar online ou descarregar pdf Manual de montagem para Altifalantes DaytonAudio MKBOOM. DaytonAudio MKBOOM 10 páginas. Mkboom bluetooth powered speaker kit

Imprimir página

9. Use a hot glue gun, caulk, or even poster tack to seal up the through-holes in the internal walls.

10. Once this is complete you are ready to glue the Top Panel on the enclosure. Clamp it securely and allow it to dry

per the glue manufacturers recommendations.

11. This is a good point to apply your chosen finish on the enclosures. Sand all surfaces and make sure all seams

are sanded smooth to ensure a quality final product.

Amplifier Panel Assembly:

12. Begin by emptying the contents of the KAB-PMV3 Panel Mount with Function, LED, and Install Kit. First install

the four 60mm Silver Standoffs on the back of the Precut Panel using four Black M3 x 6 mm Cap Head Screws

as shown below. Tighten screws with the included Hex (Allen) Wrench.