Hiboy Hiboy Nex3 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Scooter Hiboy Hiboy Nex3. Hiboy Hiboy Nex3 11 páginas.

10. Daily Care and Maintenance

Cleaning and storage

If you see stains on the scooter's body, wipe them off with a damp cloth. If the stains won't scrub off, put on some toothpaste,

and brush them with a toothbrush, then wipe them off with a damp cloth.

Notes: do not clean the scooter with alcohol, gasoline, kerosene, or other corrosive and volatile chemical solvents to prevent

dire damage. Do not wash the board with a high-pressure water spray. During cleaning, make sure that the scooter's turned

off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in electric shock or other major

problems. When the scooter not in use, keep it indoors where it is dry and cool. Do not put it outdoors for a long time.

Excessive sunlight, overheating and overcooling accelerate the battery pack's lifespan．

Battery maintenance

1. Use original battery packs, use of other models or brands may bring about safety issues;

2. Do not touch the contacts. Do not dismantle or puncture the casing. Keep the contacts away from metal objects to prevent

short circuit which may result in battery damage or even injuries and deaths;

3. Use the original power adapter to avoid potential damage or fire;

4. Mishandling of used batteries may do tremendous harm to the environment. To protect the natural environment, please follow local

regulations to properly dispose of used batteries.

5. After every use, fully charge the battery to prolong its lifespan.

Store

1. Please try to store the scooter in a cool and dry place between 14℉ and 104℉. Extremely humid environments the

interior of the scooter may suffer condensation or even water accumulation, which may damage the battery rapidly.

2. In daily use, try to avoid recharging the scooter after completely exhausting the battery. If the battery is low, charge it as

soon as possible.

3.Please charge the scooter every other month to preserve the battery.

If the brake is too tight, use the Allen wrench to loosen the screws on the caliper, and slightly send back the brake cable to shorten

the exposed length, then tighten the screws. If the brake is too loose, loosen the screws, and slightly pull out the brake cable to

lengthen the exposed length, then tighten the screws.

If the handlebar and its stem sway during riding, use the to tighten the screws on the folding mechanism.