DaytonAudio RSS210HO-4 Manual de montagem - Página 5

Procurar online ou descarregar pdf Manual de montagem para Subwoofer DaytonAudio RSS210HO-4. DaytonAudio RSS210HO-4 6 páginas. 8" mini subwoofer kit

10)

Make sure that all edges are flush and securely apply clamps from side to side, top to

bottom, and front to back. Apply ample pressure to ensure glue is spread evenly through each

joint (some glue squeeze-out can be expected). Visually inspect all seams to make sure they are

all closed tightly, you may need to relocate clamps (or add more clamps) to get a perfect fit. In

most cases only 6 clamps will be needed for an enclosure this size.

11)

Wipe away any glue squeeze-out on the outside of the enclosure with a damp rag or paper

towel (excess glue on the inside is fine). Allow to dry according to the glue manufacturer's

recommendations and remove clamps.

12)

Finally, fill any open seams with wood filler or a mixture of sawdust and wood glue.

Then sand all surfaces and seams until smooth. Finish enclosure to your liking. See our web page

for ideas and examples.