GAI-Tronics Clean Phone 295W Manual - Página 14

Procurar online ou descarregar pdf Manual para Telefone GAI-Tronics Clean Phone 295W. GAI-Tronics Clean Phone 295W 19 páginas.

Pub. 42004-146H

14 of 17

Model 295F and 295W Clean Phone™ Telephone

Page:

Incoming Calls

The clean telephone can be programmed to operate in two different modes: auto-answer and conventional

answer.

To answer an incoming call at a clean telephone programmed to operate conventionally, press the

ON/OFF button on the front panel of the telephone. The indicator light will go on when the call has been

successfully connected. Press the ON/OFF button to disconnect and end the conversation.

To answer an incoming call at a clean telephone programmed to operate in the auto-answer mode, do

nothing. The telephone will automatically answer the call after the programmed number of rings. The

call will then be connected, and conversation can take place as normal. Once the line is established, the

indicator light on the front panel will light. The telephone line can be disconnected several different

ways. See the Programming Information section for details on call termination.

To place a call from the clean telephone, simply press the ON/OFF button on the front panel, and dial the

desired number. The call is connected as with any conventional telephone. To disconnect the call, press

the ON/OFF button.

When programming and/or making test calls to emergency numbers, remain on the line, and briefly

explain to the dispatcher the reason for the call. Perform such activities in the off-peak hours, such as

early morning or late evenings.

Conversing

The clean telephone is designed to operate in a variety of environments with different noise levels. The

speaker volume and microphone sensitivity are set as part of the installation procedure. Depending on the

level settings of these two parameters, the ideal distance from which to speak into the clean telephone

may vary. The person speaking into the telephone should stand approximately 3 feet from the unit

although the distance can vary and should be determined through trial and error in your setting.

In general, it is not advisable to yell or talk loudly when speaking through the clean telephone. The

design of the unit takes background noise into consideration. Only in the loudest environments will it be

necessary to speak in a louder voice. In most situations, yelling will only degrade the quality of your

conversation.

d:\standard ioms - current release\42004 instr. manuals\42004-146h.doc

11/05