GAI-Tronics PHP400 Manual de instalação e do utilizador - Página 14
Procurar online ou descarregar pdf Manual de instalação e do utilizador para Telefone GAI-Tronics PHP400. GAI-Tronics PHP400 20 páginas. Analogue version (1090/1099 series) with ampetronic hls-dm2 induction loop amplifier 230v ac power supply
Também para GAI-Tronics PHP400: Manual de instalação e utilização do projeto (20 páginas), Manual de instalação e do utilizador (20 páginas)
Imprimir página
Where n is the level in dB, minimum 10, maximum 31, the factory default setting is
26.
This command must be entered between entering the PIN and closing the phone
down with *99 (ie during step 5 of the quick programming guide above).
CAUTION - changing this level may cause the phone to be too loud or too quiet,
and in extreme cases could affect the semi duplex operation.
To set the phone back to its factory default volume setting use
*72 26 #
This command must be entered between entering the PIN and closing the phone
down with *99 (ie during step 5 of the quick programming guide above).
Cleaning
7.
Recommended cleaning methods are outlined below:
Normal Cleaning
7.1.
For normal cleaning we recommend "Virosol", manufactured by Clover products.
Carefully follow manufacturer's instructions for storage, handling and use.
Stainless Steel Push-buttons
7.2.
Stainless steel push-buttons, where fitted, should be cleaned regularly especially if the
Help Point is in a marine environment. The stainless steel may show signs of
discolouration or rust – this will not damage the buttons or impair their performance but
may look unsightly and can be cleaned off using normal cleaning agents as above. In
extreme cases a mild abrasive may be necessary.
Graffiti
7.3.
For graffiti, paint and ink we recommend the use of 3M GR2 graffiti stain remover.
CAUTION: This is a very aggressive chemical. Pay close attention to the manufacturer's
recommendations for storage, handling and use.
Anti-Graffiti Coating
7.4.
Where polyurethane anti-graffiti coating or paint has been specified (as an option), it
can be cleaned using Methylated Spirits or Methyl Isobutyl Ketone. Other cleaners can
be used but should be tested on a small area first.
Aftercare
8.
The purchase of your GAI-Tronics product does not end our commitment to you.
In addition to our warranty obligations, GAI-Tronics are able to offer various levels of
maintenance packages, installation and commissioning packages and technical support,
from ad-hoc repairs to full maintenance contracts.
By choosing GAI-Tronics as your aftercare provider you are ensured of manufacturer
expertise and ISO 9001-certified quality control standards throughout the life of the
product.
We can also supply a full range of accessories including mounting posts, beacons and
high-volume sounders.
Contact GAI-Tronics for details.
www.gai-tronics.co.uk
PHP400 GSM Help Point.
14