GAI-Tronics Titan Illuminated Crossing Telephone Manual de instalação e do utilizador - Página 7
Procurar online ou descarregar pdf Manual de instalação e do utilizador para Telefone GAI-Tronics Titan Illuminated Crossing Telephone. GAI-Tronics Titan Illuminated Crossing Telephone 14 páginas. Illuminated crossing telephone
Imprimir página
3
INSTALLATION
All possible measures must be taken to ensure water or fluid does not
contaminate the internal components of the telephone whilst unpacking,
preparing and installing the telephone in inclement weather conditions or
by negligence.
Failure to carry out this basic function may invalidate your warranty and
Certification
As supplied the telephones are suitable for wall/vertical surface, pole or post
mounting.
If only one gland is used, the sealing plug should be left in place.
3.1
Vertical Surface or Wall Mounting
As supplied, the telephone is only suitable for vertical surface mounting.
The following parts are included in the standard installation kit:
2 - cable glands with sealing washers
1 - 4mm socket wrench
1. Place the telephone on its rear surface on a firm horizontal surface.
2. Open the cover, release the front plate from the rear enclosure by
unscrewing the four captive screws using a 3mm socket wrench provided.
1. Remove the RED blanking plug from the cable entry hole leaving the
YELLOW plug in situ.
Titan Illuminated Crossing Telephone
IMPORTANT
Figure 3 – Releasing the front plate
5