DynaGen GSC400 Series Manual do Utilitário de Calibração - Página 13
Procurar online ou descarregar pdf Manual do Utilitário de Calibração para Controlador DynaGen GSC400 Series. DynaGen GSC400 Series 18 páginas. For generator
Também para DynaGen GSC400 Series: Manual do programador (4 páginas)
Imprimir página
3. If the GSC400 is not already in the
RUN mode place the GSC400 in
the RUN mode and wait until AC
voltage reading stabilized.
Click OK.
The utility will then read the
generator voltage.
4. Finally click Next.
5. Out of the two AC currents
(loads) you picked for
calibration place the smaller
load on the generator and
measure the actual current.
Record the current in the utility.
Click Next.
13 of 18
Figure 9
Figure 10
Figure 11