DynaGen Tough Series Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Painel de controlo DynaGen Tough Series. DynaGen Tough Series 12 páginas. Digital generator controllers
Imprimir página
Using the Remote
Using the Remote Panel
3
This section discusses how to use the remote.
Using the Menu System
Task
Entering Menu
Navigating Menu
Change a Setting
Scroll Parameters
Lock Screen
Events History
Front Panel Item s
Item
3.1
Power Up
Whenever the remote panel is pow ered up it w ill attempt to register w ith the local controller. This happens on every pow er
up.
Registration is a pairing process that establishes a communication link. Once established the remote panel and local controller
can communicate w ith each other.
TOUGH Series Manual
Description
When in the OFF mode, press the enter button to bring up the menu.
Once in the menu, use the up and dow n arrow s to navigate. Pressing enter w ill move you
into that menu.
Scroll to the desired value and press enter to select. A check mark should appear beside
that item. Press enter again to save the setting and return to the previous screen.
When in Auto or Running mode, pressing the up and dow n arrow s w ill scroll through the
parameter pages.
When in Auto or Running mode, the screen can be locked to a certain parameter page by
pressing Auto and unlocked by pressing Auto again.
Once in the menu, select Events History to view the most recent controller event. Use the
up and dow n arrow s to navigate to other events. The controller can store up to 150 events.
If more than 150 events occur, the oldest event is deleted to make room for the next event.
Nam e
Description
Off Button
Used for turning off the engine or exiting out of Auto mode. This is not
intended to function as an Emergency Stop as there are conditions in
w hich it w ill not shut dow n the engine. See the OFF Button Function
section for more information.
Auto Button
Used for placing the controller into AUTO mode or locking the LCD screen
w hen view ing parameters. Once in AUTO mode, the controller w aits for
a start command to be received.
Run Button
Used to start the engine manually. The Off button must be used to shut
dow n the engine if it has been started using the front panel.
Up/Speed Increment
Used for moving around in the menu, changing a setting's value, or
Button
incrementing the engine speed in manual mode.
Scroll/Enter Button
Used for entering the menu system, accepting settings, or changing the
currently displayed parameter page.
Dow n/Speed
Used for moving around in the menu, changing a setting's value, or
Decrement Button
decrementing engine speed in manual mode.
Engine LED
Green = Engine running w ith no issues
Amber = Engine running w ith w arnings
Red = Engine shut dow n on failure
© 2019 DynaGen Technologies Inc
6