Automatic Technology GDO-8 ShedMaster Manual de operação rápida - Página 4
Procurar online ou descarregar pdf Manual de operação rápida para Sistema de abertura de portas Automatic Technology GDO-8 ShedMaster. Automatic Technology GDO-8 ShedMaster 5 páginas. Weather resistant rolling door opener
Imprimir página
5 . 0 T R O U B L E S H O O T I N G
Symptom
The opener
does not
work from
the remote
One remote
works but
the other/s
do not
The motor is
running but
the door
remains
stationary
The remote
range varies
or is
restricted
The door
stops of
moves very
slowly
The door
reverses for
no apparent
reason
The
SERVICE
LED has
started to
flash and
opener is
beeping
numerous
times
Possible cause
The opener does not
have power
The battery in the
remote control is flat
The remote button is
not programmed to
operate the door.
Door Code LED is
flashing yet the opener
is not working.
Faulty remote control
Flat battery
The opener is
disengaged
Variations are normal
depending on
conditions e.g.
temperature or
external interference
The battery life is
exhausted
Garage door in poor
condition e.g. springs
may be broken
If Safety beams are
installed they may be
partially obstructed
A Fault has been
detected. The fault will
be active each time an
attempt is made to
operate the door.
Remedy
Plug a device of similar
voltage (e.g. a hairdryer) into
the power point and check it
is OK.
Replace the battery
Code in the remote control
button
Ensure the correct button on
the transmitter is being
pressed.
Replace remote control
Replace battery
Re-engage the opener
Make sure you can see the
door when you use the
remote control
Check the battery status as
per section 4 of this guide
Check the door's operation
Ensure the beam path is not
obstructed. Check the
alignment of the beams
Record opener function
(How many beeps?) then
press the SET button once
to reset the opener. If the
falt continues to be tripped
contact 1300 133 944 for
support.