AirCycler g2-k Manual de formação - Página 12
Procurar online ou descarregar pdf Manual de formação para Termostato AirCycler g2-k. AirCycler g2-k 20 páginas.
Também para AirCycler g2-k: Manual de instalação e do utilizador (11 páginas), Manual de teste de instalação (2 páginas), Manual de teste de instalação (2 páginas)
Imprimir página
3.0 Setup Options
Calculated Flow
Setup
Enter measured outside
airflow to the air handler
Enter measured
exhaust flow
*If using FanConnect™ switch
Enter required continuous
airflow required by code
NO
Enter desired delay time
*If using FanConnect™ switch
Calculated Time
Enter required minutes per
hour of ventilation
Enter min/hour of exhaust
ventilation desired
*If using FanConnect™ switch
Enter optional
mix time
Do you want to
set ventilation
hours?
Set desired hours
of operation
Set current
time
END
Begin normal
operation
Setup
YES
12
Calculated Flow
If you know the amount of fresh air that
goes into the air handler as well as the
flow required by code, you can simply
enter them into the AirCycler® g2
controller during set up.
Calculated Time
If you'd prefer to configure the amount
of time you want fresh air ventilation per
hour, you can enter the total minutes per
hour into the AirCycler® g2 during set
up.
AC DOC 8.5
REV 7/2020