Dynalabs DYN-IS-5 Manual do produto - Página 14
Procurar online ou descarregar pdf Manual do produto para Pulverizador de tinta Dynalabs DYN-IS-5. Dynalabs DYN-IS-5 15 páginas. 5 n inertial shaker
Imprimir páginaAll rights reserved. Reproduction or issue to third parties in any form whatsoever is not permitted without written authority from the proprietors.
4) Maintenance and Troubleshooting
The DYN-IS-5 shaker is a sealed device requiring no maintenance if the
operating instructions described in this manual are followed. Repair of the
coil, exciter body or magnet core should not be attempted. Please return the
shaker to Dynalabs for proper repair.
Do not apply high levels of axial force on the shaker. The suspension spring
is designed to carry the shaker weight only.
Inadequate mounting of force transducers or shaker head can lead to
permanent damage to the shaker. If such a case happens, please send the
shaker to Dynalabs for repair.
5) Safety
Please ensure that this manual section is reviewed and understood prior to
installation, operation or maintenance of the equipment. The danger of
electrical shock or fire always exists in electrical equipment.
The DYN-IS-5 Shaker is designed for safe operation. Safety features such
as electrical insulation on outer surfaces are provided for the safe operation
of the shaker system. Always monitor the applied voltage to the amplifier
and shut down the shaker if the temperature of the shaker body rises
drastically or smoke is observed from the shaker due to high voltage levels
applied.
5.1) Grounding
The shaker is internally grounded via the power adapter. However, if further
grounding is necessary a grounding socket is available on the shaker as shown.
Appropriate grounding cable is also supplied with the shaker.
14