GAIA 8000 Manual de informações gerais - Página 10

Procurar online ou descarregar pdf Manual de informações gerais para Aspirador de pó GAIA 8000. GAIA 8000 18 páginas.

Connecting the textiles tool (i) and window wiper (h)

To clean armchairs, mattresses, and fabric surfaces, use the

textile tool (i), using the steam function and then the vacuum

function to vacuum up the steam and dirt.

For the cleaning of glass and small hard surfaces, attach the

window wiper (h) to the textiles tool (i), Fig. 7, by sliding the

window wiper on the tool in the direction shown in the illustration.

Connecting the hose (e)

- Flick the accessory socket door (5) wide open and fit the

quick connection of the hose (e) to the socket on the front of

the appliance. Press the connection in as far as it will go.

- Close the accessory socket door (5) so that is rests on the

body of the quick connection and check that the two elements

are properly engaged. Fig. 8

VACUUM CLEANING ALONE

- Switch on the machine at the main switch (2) and push the

vacuum function button (7). Figures 9-10.

- Adjust the vacuuming power via the vacuum power buttons

(12) (14) (increase/reduce vacuum power)

- Push the vacuum function control button (g) on the handle of

the work hose (e) to activate or deactivate the vacuum function.

Fig 11.

STEAM CLEANING ALONE

- Switch on the machine at the main switch (2) and push the

boiler heating button (8). As soon as the 'operation ready'

control lamp (10) illuminates, you can work with steam.

Fig. 10.

- Adjust the steam volume via the button (13) on the control

panel (3). Fig 10.

- Push the steam on/off button (f) on the handle of the work

hose (e), to activate or deactivate the steam function. Fig 11.

Fig. 7

Fig. 8

Fig10.

Fig. 9

Fig. 10

Fig. 11

7 8 9