Automation Direct D0-05DA Começar a trabalhar - Página 6

Procurar online ou descarregar pdf Começar a trabalhar para Controlador Automation Direct D0-05DA. Automation Direct D0-05DA 13 páginas.

Automation Direct D0-05DA Começar a trabalhar
Chapter 1: Getting Started

Quick Start for PLC Checkout and Programming

The following is example is not intended to tell you everything that you will need to start-up
your system, but is only intended to give you a general picture of what you will need to get your
system powered-up. Please review warnings and helpful tips by becoming familiar with the
content of the rest of the manual.
Step 1: Unpack the DL05 Equipment
Unpack the DL05 and gather the parts necessary to build this demonstration system. The
recommended components are:
• DL05 Micro PLC
• AC power cord or DC power supply
• Toggle switches or simulator module, F0-08SIM(see Step 2 on next page).
• Hook-up wire, 16-22 AWG
• DL05 User Manual (this manual)
• A small screwdriver, 5/8" flat or #1 Phillips type
You will need at least one of the following programming options:
• DirectSOFT Programming Software, DirectSOFT Manual, and a
programming cable (connects the DL05 to a personal computer), or
• D2-HPP Handheld Programmer (comes with programming
cable), and the Handheld Programmer Manual
1-6
DL05 Micro PLC User Manual, 6th Edition, Rev. E