ADEMCO 990 LR Manual de instalação

Procurar online ou descarregar pdf Manual de instalação para Sensores de segurança ADEMCO 990 LR. ADEMCO 990 LR 6 páginas. Passive infrared motion detectors

Imprimir página
NSS43 7191
INSTALLATION HINTS
(;APEMCOI
INSTALLATION
INSTRUCTIONS
GENERAL INFORMATION
These passive infrared motion detectors are versatile
wall-mounted
units employing
Fresnel lenses and-
offering efficient protection patterns for commercial and
residential applications.
The detectors sense Sudden
and slight changes in temperature within the area Of
detection; thus, when an intruder crosses or enters any
zone.
the resulting
change
in infrared energy
iS
detected for.alarm
reporting.
Best coverage will be
obtained if mounting is selected such that the likely
direction of intruder motion is across the pattern.
The No. 990 is equipped with a wide-angle lens, the
No. 990LR with a long-range lens. and the No. 990PA
with a pet alley lens.
SPECIFICATIONS
Detection Method:
Coverage:
Detectable
Walk Rate:
Mounting Height:
Indicator:
Input Voltage:
Alarm Reley:
Current Dmln:
Standby Capability:
Operating
Tempemtum:
329 - 1229 (PF - 50%)
Opemtlng Humidity: Use9zRH
(max.),
Dlmenelone:
r Wtie (5lmm)
3.8' Hiah (96.5mm)
Passive
Infrared.
No. 990 (wideangk)
40ftxs6ft
(12.2m x 17m)
Ivo. swm
fmnpange)
70 ft x 0.4 n
(21.3m
x 2.6m)
No. 99OPA @ef a/fey)
40ftxs6ft
(122m x 17m)
OS-Sfvsec(.15-15tWseJc).
7ft
nominal (2.lm)
Red LED with enabWdisabte
feature.
12
VDC normnat Wtage
reversal
makes PIR inoperative).
Form A. N.C.. D.13A max.
contact
ratmg @ 28V DC.
1 !S-ohm intefnat resistor in
Series.
15mA.
Power source sh0ukt be
capableo~atte8st4h0ursOf
battery standby.
1.6- D&3$(40.6mrn).
non-
Do not install where the defector is exposed to direct
sunlight or directly above strong sources
of
heat.
Make sure the detection area does nol have ob-
sIrucIions (curtains. screens, large pieces of fur-
niture. plants. etc.) which may block the pattern of
coverage.
Avoid locating a detector in areas which contain
objec& likely to produce a rapid change in tempera-
ture. such as cenrral heating, radiators or ducts (or
hearers of any kind), air conditioners.
open flame.
etc.
Do not mount on an unsrable surface.
Impofianl:
Avoid running alarm wiring close to heavy-
duty electrical power cables.
PROTECTION PATTERNS
The protection patterns shown belo* can be modified
to suit the needs of a particular area by selective use of
the masking strips supplied.
DETECTtON
AREA - No. 990
DElECTtON AREA - No. BQOPA
i
'
-
'
.
(=;&::c;lL,
DETECTtONAREA-No.-
1.