Dynalink RTA020 Manual de configuração rápida - Página 3

Procurar online ou descarregar pdf Manual de configuração rápida para Router de rede Dynalink RTA020. Dynalink RTA020 6 páginas.

Select DNS Configuration, click Enable DNS. Type in any name for host.

Put in your ISP's DNS address. Click Add. A second DNS address (if

specified) can be added in a similar way.

In case you do not have a DNS address from your ISP, you may use one of

the following:

150.199.1.11

128.206.2.252

131.151.254.243

Click OK & then OK to exit. Windows may ask for the Windows CDROM

and will ask to restart. Answer Yes.

Step 3. Use web browser to configure router

Start your web browser and

type the private IP address

of the router

http://192.168.1.1.

You will be prompted to

enter User Name and

Password. By default, user

name is admin and

password is private.

Step 4. Enter Internet account User Name and Password

Go to Configuration > WAN > ATM PVC > Setup ATM PVC. Select the pre-

configured "MyConnection" PVC Interface as shown in the figure.

Next scroll down to locate PPPoA Configuration. Edit the User Name and

Password fields using the user name and password specified by your ISP,

scroll down and click Submit.