Dynalink RTA1335 Manual de configuração rápida - Página 11
Procurar online ou descarregar pdf Manual de configuração rápida para Router de rede Dynalink RTA1335. Dynalink RTA1335 16 páginas. Adsl2+ 4-port modem router
Também para Dynalink RTA1335: Brochura e especificações (3 páginas)
Imprimir páginaADSL 2+ 4-Port Modem Router Quick Set-up Guide
of your router and network. Use the built in access control list to restrict
access to only authorised Internet hosts.
Enable IP extension (bridging) without firewall protection. If the router operating
in this mode is connected to a computer, to the minimum have a "personal
firewall" (software) to protect the computer.
Send your router away for repair or replacement without resetting to factory
default or wiping out your Internet account login details. Use the Backup
Configuration option to store your router's setting elsewhere. This function
can be found in the router's Management > Backup Config menu. When a
replacement unit is received, restore the original setting from the backup file.
9
Indicator lights
There are 7 indicators on the front panel.
Function
Power
DSL
PPP
Ethernet
1 to 4
Colour & Status
Off
Solid Green
Solid Red
Flash Red
Off
Slow Flash Green
Fast Flash Green
Solid Green
Off
Solid Green
Off
Flash Green
Solid Green
Definition
Power is off.
Power is on and the device operates normally.
Power on self-test in progress.
The device enters the console mode of
the boot loader.
Power on self-test failure if this light
remains solid.
Firmware upgrade in progress
No DSL signal is detected
DSL line handshaking in progress
DSL line training in progress
DSL line connected
Modem is not online
Modem is online
No Ethernet signal is detected
Data going through Ethernet port
Ethernet interface is ready