Dynalink RTA770 Manual de configuração rápida - Página 3

Procurar online ou descarregar pdf Manual de configuração rápida para Router de rede Dynalink RTA770. Dynalink RTA770 16 páginas. Adsl router/modem

Default Configuration for Australia

This router is shipped with the following factory default settings.

Router IP address

Subnet mask

VPI

VCI

Connect mode

NAT

DSL line mode

WAN IP

DHCP

DNS relay

UPnP IGD

Firewall incoming

Firewall outgoing

Router configuration & management:

User name

Password

Telnet password

If your ISP specifies that your ADSL service is PPPoE, connect mode must be

changed to PPPoE LLC/SNAP. Instructions will follow. Check with your ISP if

you are unsure of the type of service you have subscribed to. Advanced users

who have other setup preferences should first read the User's Manual.

Before you start

Make sure your computer has these installed:

Ethernet or USB port

TCP/IP protocol enabled

A web browser, Internet Explorer 5.0/Netscape 6 or better.

Obtain your Internet account information from your ISP:

Public IP address (only if you subscribe for static IP)

DNS server IP (only if specified by ISP).

192.168.1.1

255.255.255.0

PPPoA VC-MUX

enabled

auto select G.DMT / T1.413

dynamic

enabled

off

admin