Automation Direct ATLAS ATM1900T Manual de instalação rápida - Página 4

Procurar online ou descarregar pdf Manual de instalação rápida para Monitor Automation Direct ATLAS ATM1900T. Automation Direct ATLAS ATM1900T 4 páginas. Industrial flat panel pc monitor

Imprimir página

Accessories & Replacement Parts:

Part Number

ATM-CBL-VGA10

10 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.

ATM-CBL-VGA25

25 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.

ATM-CBL-VGA50

50 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.

6 ft. (2 meter) DVI (type D) video cable. Connects ATM1700 and ATM1900 to a standard DVI-D

ATM-CBL-DV2M

port. DVI cables provide a higher bandwidth video interface than the VGA cables.

10 ft. (3 meter) DVI (type D) video cable. Connects ATM1700 and ATM1900 to a standard DVI-D

ATM-CBL-DV3M

port. DVI cables provide a higher bandwidth video interface than the VGA cables.

10 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.

ATM-CBL-10

(touch screen models only)

25 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.

ATM-CBL-25

(touch screen models only)

50 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.

ATM-CBL-50

(touch screen models only)

3-ft (0.9 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all

USB-CBL-AB3

USB devices. (touch screen models only)

6-ft (1.8 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all

USB-CBL-AB6

USB devices. (touch screen models only)

10-ft (3 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all

USB-CBL-AB10

USB devices. (touch screen models only)

15-ft (4.6 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all

USB-CBL-AB15

USB devices. (touch screen models only)

ATM-AC-CON

Replacement Power Wiring Connector for AC Powered Units.

ATM-CLIP

Replacement flat panel mounting clip kit. Package of 16 clips and screws.

ATM-CBL-VGA10

ATM-CBL-VGA50

ATM-CBL-DV3M

Additional Help and Support

• For product support, specifications, installation, and

troubleshooting, a Hardware User's Guide, ATM-

USER, is included on the supplied Documentation

and Driver CD, or downloadable from the Online

Documentation area of the utomationDirect Web site.

• For additional technical support and questions, call our Technical

Support team @ 770-844-4200.

Description

ATM-CBL-VGA25

ATM-CBL-DV2M

ATM-CLIP

ATM-CBL-10

ATM-CBL-50

USB-CBL-AB6

USB-CBL-AB15

WARNING

To minimize the risk of potential safety problems, you should

follow all applicable local and national codes that regulate the

installation and operation of your equipment. These codes vary from

area to area and it is your responsibility to determine which codes

should be followed, and to verify that the equipment, installation, and

operation are in compliance with the latest revision of these codes.

Equipment damage or serious injury to personnel can result from the failure

to follow all applicable codes and standards. We do not guarantee the prod-

ucts described in this publication are suitable for your particular applica-

tion, nor do we assume any responsibility for your product design,

installation, or operation.

If you have any questions concerning the installation or operation of

this equipment, or if you need additional information, please call

Technical Support at 770-844-4200.

This publication is based on information that was available at the time

it was printed. At Automationdirect com

improve our products and services, so we reserve the right to make

changes to the products and/or publications at any time without notice

and without obligation. This publication may also discuss features that

may not be available in certain revisions of the product.

ATM-CBL-25

USB-CBL-AB3

USB-CBL-AB10

ATM-AC-CON

we constantly strive to