Agrimate AMTH-PRO-K-2S Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Equipamento para relva e jardim Agrimate AMTH-PRO-K-2S. Agrimate AMTH-PRO-K-2S 20 páginas.

Imprimir página

When finishing working or moving even for a short distance, do shut off the gasoline

engine.

When working, do not touch the spark plug.

10.

The banding angular magnitude of flexible shaft can't be too big to break. Before working,

insert the flexible shaft with grease on it into the flexible duct and pull it for several times.

VI. Starting and stopping of the gasoline engine

Press the oil pump for several times before working. The fuel goes into the carburetor. All

the throttles should be shut off.

When the gasoline engine is under cool state or in winter, close the red chocker of

carburetor when open the electric circuit.

Fix the machine and pull the starting rope.

After starting, add the throttle for a little and run free for 2~3 minutes to warm-up. Later,

add the throttle and work normally.

Stopping: Switch the throttle to low-speed to slow it down. Work 2~3 minutes for cold

running and then switch off the machine.

VII. Maintenance and adjustment

Because the blades work at a high speed, it should be oiled once per hour during working.

Please use HG-10# lubricating oil.

Inspect and adjust the space between blades. After some time of working, blades are worn

and screws are loose. These can change the normal space (about 0.05 mm), so please pay

regular attention to their working condition.

Inspect the firmness of the screws and the space between the blades. Improper space

may reduce the working ability of machine. Too large space may let the blades easy to be

broken. It does not only reduce the quality of tea, but also make the surface of tea tree

unsmooth. Too small space may lead to a large load and hardship of working or scathe the

blades.

1. Upper blade

2. Nut;

3. Washer;

4. M6 screw;

5. bottom blade