GAIN EXPRESS WEA-289 Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Estação meteorológica GAIN EXPRESS WEA-289. GAIN EXPRESS WEA-289 11 páginas. Colorful screen display
Também para GAIN EXPRESS WEA-289: Manual do utilizador (10 páginas)
Imprimir página
g.
If the main unit cannot receive the signal after three minutes, you can hold
and press "CH" button at the back of main unit to re-register or take out the
batteries and repeat the previous steps from a ~ e.
h.
The sensors will be reset after changing new batteries. Please be reminded
to go through the previous steps to set up the weather station again after
changing the new batteries.
NOTE:
1.
If the Low battery indicator symbol is displayed on the sensor or main unit,
please replace new batteries for them.
2. Backlight:
a.
When you use the battery as power supply, press the "SNZ/LIGHT" button
to light up the display for approximately 10 seconds. (In battery mode the
display brightness regulation is disabled.)
b.
When you use the USB line as power supply, the backlight will light up all
the time.
c.
We recommend best using the original USB line for the main power
supply and the battery for the backup power supply.
TIME SETTING
a.
Press and hold "Set" button for about 3 seconds to enter the time setting
mode.
Press "Up" or "Down" button to adjust the time.
b.
c.
Press "Set" again to confirm the setting and go on for the next setting.
d.
Setting order is hour → minute → year → month → day → 12/24HR → exit.
Press "SET" to confirm the setting and go on for next setting.
e.
f.
Setting will be auto-saved once without any operation for 20 seconds.
ALARM SETTING
• Alarm time setting
a.
Press "SET" button once to switch to alarm time display (AL).
b.
Under alarm time display (AL) mode, press and hold "SET" button for about
3 seconds to enter the alarm setting mode.
c.
Press "Up" and "Down" button to adjust the time.
d.
Press "SET" button again to confirm the setting and go on to the next
setting
e.
Setting order is hour → minute → exit.
f.
Setting will be auto-saved once without any operation for 20 seconds.
E N G L I S H
SETTING UP THE MAIN UNIT
- 5 -