Gainbridge GT3012 Manual de instalação - Página 7

Procurar online ou descarregar pdf Manual de instalação para GPS Gainbridge GT3012. Gainbridge GT3012 12 páginas. Magnetic &portable gps tracker

Imprimir página

details.

6.3 Emergency takeover function

With the proper password, any phone number could takeover of full functionality under emergency

situation.

SMS:

*master*123456*+1XXXXXXXXXXX *

+1XXXXXXXXXXX. +1 refers to the country code.

XXXXXXXXXXXX is the cellphone number. Please make sure country code is included, and 0 is not

needed before cell phone number)

You will receive back a text that says: "Master controller change is successful for

+1XXXXXXXXXXX, the new master controller is +1XXXXXXXXXXXX."

6.4 Changing the Password

SMS:

*password*654321*

You will receive the following text: " The password change is successful for +1XXXXXXXXXX. The

new password is 654321."

7. Motion Detected Alert

The Master Controller will receive an alert (call or SMS) once the device detects vibration indicating

possible motion.

7.1 Vibration sensitivity

The device you have purchased is equipped with a sensitive Vibration detection system. Since

certain applications are more sensitive to external vibration sources, the sensor has variable

sensitivity settings. The unit comes from the factory pre-set to #1, on a scale of 1-5, with 1 being the

most sensitive. If you notice you are getting excessive false movement alerts (like when a heavy

truck drives by), you can simply send the following SMS to the unit, and reset the variable:

SMS:

*sensitive*1-5*

1=3seconds continued vibrating

5=15seconds continued vibrating

Default setting is 1 (per the explanation above)

Device Response:

7.2 SMS or CALL Alert Settings

The Alert function(s) can be set accordingly with the following SMS commands. The system default

setting is call alert.

SMS:

*alertoff*

Device Response: "System has ended alert function."

SMS:

*smsalert*

Device Response: "System has entered SMS alert function."

SMS:

*callalert*

Device Response: "System has entered call alert function."

Note:

* By Default, the Alert System automatically initiates a notification to the Master Controller when the

motion sensor is activated after 3 minutes of non-movement, indicating vibration that may indicate

(654321 refers to new password)

(where X = 1-5, 1 being the most sensitive, 5 the least)

"Vibration sensitivity is set to 1-5."

(For instance, master controller phone number is

7 / 12