Gainbridge GT3018 Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para GPS Gainbridge GT3018. Gainbridge GT3018 11 páginas. Covert bike tail light tracker
Imprimir página
This is a factory command. Only manufacture is able to send this command.
SMS:
*brd*XXX*
(XXX refers to the new brand name)
Device Response: "XXX inform: The new brand name is set."
16. Low Battery Alert
The Bikelight is equipped with an automatic "Low Battery" detection and alert when the battery
drops to 20% of its capacity.
The Bikelight Alert and PRO models will send an SMS to the Controller cell phone, and routetrack
function will be turned off for power saving.
And the taillight, when activated by motion, stops flashing and remains on as a constant.
17. Command Setting List
Function
APN Setting
Master Setting
Password Changing
Vibration Sensitivity
Setting
Alert Setting
LLC Query
Address Query
Google Map Search
Routetrack Setting
Routetrack Sampling
Routrack Upload
SMS Command
*apn*AXXX*BXXX*CXXX*
*master*123456*+1XXXXXXX* +1 refers to the country code.
*password*654321*
*sensitive*1-5*
*callalert*
*smsalert*
*alertoff*
*locate*
*locateaddress*
*locatemap*
*routetrack*1-99*
*rsampling*1-999*
*rupload*60-999*
This command sets the telecom
Access Point Name. BXXX refers to
user name, CXXX refers to password.
XXXXXXXX is the cell phone number.
Please make sure country code is
included, and 0 is not needed before
cell phone number
Original password is default as 123456.
654321 refers to new password.
1 being the most sensitive, 5 the least.
Default setting is 1.
Call alert will call master number 2 times
when motion is detected after 3 minutes
non-movement.
SMS notification will sent to master
number when motion is detected after 2
minutes non-movement.
End Call/SMS alert
Latest information of latitude, longitude,
date, time and ranking.
Address information of current location.
Google Map link with current location.
1-98 represents hours of accumulated
data, 99 means always on.
1-999 represents seconds of data
collecting
seconds.
60-999 represents seconds of data
uploading
seconds, minimum rate should not be
less than 60.
10 / 11
Description
interval,
default
interval,
default
as
10
as
60