Gainbridge GT3088 Manual de instruções - Página 12
Procurar online ou descarregar pdf Manual de instruções para GPS Gainbridge GT3088. Gainbridge GT3088 17 páginas. Magnetic & portable gps tracker with
Imprimir página
current location data and check for new commands on SMS. If no new command is received, the
device returns to sleep for the next interval. The Master Controller will not receive any call alert
when system ends deep sleep function.
SMS:
*sleep*1-99*
(1-99 represents hours of deep sleep period.)
Device Response: "Notice: System is going to enter deep sleep function, and will be ended every
XXX hours."
SMS:
*sleepoff*
Device Response: "Notice: System has ended deep sleep function."
It is critical to note, that once you engage Deep Sleep, the device is incapable of receiving or
processing commands until the interval passes and the device wakes up. Make sure you have ALL
configuration and time settings done BEFORE engaging Deep Sleep.
11.4 Sleep time
The Sleep Time function is to allow Deep Sleep for periods when you are not concerned about
movement, but closer periodic updates for time periods you are. The Device stays in Deep Sleep
until a certain time of day, and begins periodic location updates in two hour intervals until the "end"
of the day.
SMS:
*sleeptime*
time, 24 hours format) Example: *sleeptime*17*05* = The device Sleeps between 5PM and 5Am
the following morning. From 5AM until 5 PM, the device will report every two hours.
Device Response:
is XX hours"
SMS:
*sleeptimeoff*
Device Response:
11.5 Timed Locate
11.5.1 SMS:
*timinglocate*XXXX*XXXX**XXXX*
(XXXX represent time and minutes, minimum unit is 30 minutes, maximum timing setting is 10. EG
*timinglocate*0800*1100*1400*1830* means 8am, 11 am, 2pm and 6:30pm of the day)
a.
Device will enter deep sleep function once command is received.
b.
System will be activated at appointed time, starts GPS and upload location data in 3-7mins.
Master controller will
and ranking. And you can find this location in details from the tracking website.
c.
If no GPS signal is found, cell tower information will be sent instead.
d.
System will enter deep sleep function again if no new command is received during the 12 minutes
activating time.
a text message "System has entered timing locate function."
You will receive
11.5.2 SMS:
*timinglocateaddress*XXXX*XXXX**XXXX*
(XXXX represent time and minus, minimum unit is 30 minutes, maximum timing setting is 10. EG
*timinglocateaddress*0800*1100*1400*1830*
means 8am, 11 am, 2pm and 6:30pm of the day)
You will receive back a text include rough address information of the device. Tracking website is not
required.
0-23*0-23*
(The first 0-23 represent start time, the second one represent stop
"System is going to enter deep sleep function from XX to XX. Deep sleep period
"System has ended deep sleep function."
receive back a text include latest information of latitude, longitude, date, time
12 / 17