Gainlab Audio GLA-MP1 Manual - Página 5

Procurar online ou descarregar pdf Manual para Amplificador Gainlab Audio GLA-MP1. Gainlab Audio GLA-MP1 15 páginas.

INPUTS AND INPUT SELECTION

You can ﬁnd several different inputs on

the Bishop. Two inputs on the back, for

microphone and line signal. A combo XLR

on the front panel for connecting

microphone, line source, or instrument. If

microphone is plugged into the front panel combo, it will

automatically disconnect the rear panel MIC input. With

the input selection switch on the front

panel, you can choose which type of signal

you want to use the device with.

INSTRUMENT DRIVE

It is possible to add extra distortion to the

instrument input. To do this, select the

instrument input on the input selector. Use

the drive potentiometer to set the desired

amount of added distortion.

GAIN SELECTOR DIAL

LINE INPUT

The gain of the Bishop can be

set on the Gain Selector Dial.

The Gain Selector Dial is

divided into two sections, a Low

and a High section. The maximum

ampliﬁcation of the Low section is

+40dB, the maximum ampliﬁcation of

the High section is +60dB. It is

possible to switch between the

High and Low sections with the

switch labeled Gain, and within

the section it is possible to

select the desired gain value

with the gain rotary switch.

MIC. INPUT