Gree 26TTW09HP230V1A Manual do Proprietário - Página 8

Procurar online ou descarregar pdf Manual do Proprietário para Ar condicionado Gree 26TTW09HP230V1A. Gree 26TTW09HP230V1A 16 páginas. Ttw

Imprimir página
AIR CONDITIONER FEATURES
Notice:
•
When power is connected (stand by condition), you can
operate the air conditioner through the remote control.
•
When unit is on, each time you press the button on the
remote control, the sending signal icon "
play of remote control will blink once. If the air conditioner
gives out a beep sound, it means the signal has been
sent.
•
When unit is off, set temperature will be displayed on the
remote control. If the light of indoor unit display is turned
on, the corresponding icon will be displayed. When the
unit is on, it will display the icon of the on-going function.
•
This is a general use remote control, it could be used for
air conditioners with multifunction. For some function, which
the model doesn't have, if press the corresponding button
on the remote control that the unit will keep the original
running status.
1
ON/OFF button
Press this button to turn unit on/off.
2
MODE button
Pressing this button once can select your required mode
circularly as below (the corresponding icon "" will be lit
up after the mode is selected):
*Only for models with heating function.
•
When selecting cool mode, the air conditioner will oper-
ate under cool mode. Then press + or - button to adjust
set temperature. Press FAN button to adjust fan speed.
•
When selecting fan mode, the air conditioner will operate
in fan mode only. Then press the FAN button to adjust fan
speed.
•
When selecting heat mode, the air conditioner will oper-
ate under heat mode. Then press + or - button to adjust
the set temperature. Press FAN button to adjust fan speed.
Cooling only units can't receive heating mode signal. If
setting HEAT mode by the remote control, pressing the
ON/OFF button can't turn on the air conditioner.
Note:The unit can only receive the signal for cool/fan/heat
and it has no action when receiving the signal of other
mode.
3
+ / - button
•
Pressing "+" or "-" button once will increase or decrease
set temperature by 1°F(°C). Hold "+" or "-" button for 2
" on the dis-
seconds, set temperature on remote controller will change
quickly. Release the button after your required set tem-
perature is reached.
•
When setting Timer On or Timer Off, press "+" or "-"
button to adjust the time. See TIMER Button for setting
details.
4
FAN button
Pressing this button can select fan speed circularly as: AUTO, SPEED 1 (
SPEED 2 (
Note:
•
Under Auto speed, air conditioner will select proper fan
speed automatically according to ambient temperature.
5
TIMER button
•
When unit is on, press this button to set Timer Off. T-OFF
and H icon will be blinking. Within 5 seconds, press "+"
or "-" button to adjust the time for Timer Off. Pressing
"+" or "-" button once will increase or decrease the time
by 0.5h. Hold "+" or "-" button for 2 seconds, time will
change quickly. Release the button after your required
set time is reached. Then press TIMER button to confirm
it. T-OFF and H icon will stop blinking.
•
When unit is off, press this button to set Timer On. T-ON
and H icon will be blinking. Within 5 seconds, press "+"
or "-" button to adjust the time for Timer On. Pressing
"+" or "-" button once will increase or decrease the time
by 0.5h. Hold "+" or "-" button for 2 seconds, time will
change quickly. Release the button after your required
set time is reached. Then press TIMER button to confirm
it. T-ON and H icon will stop blinking.
•
Cancel Timer On/Off: If Timer function is set up, press
TIMER button once to review the remaining time. Within 5
seconds, press TIMER button again to cancel this func-
tion.
8
), SPEED 3 (
), SPEED 4 (
AUTO
),
) .