Hiddn KryptoDisk 2 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Armazenamento Hiddn KryptoDisk 2. Hiddn KryptoDisk 2 16 páginas. Selfkey model
Também para Hiddn KryptoDisk 2: Manual de instalação rápida (2 páginas), Manual do utilizador (17 páginas)

Imprimir página

Please refer to section 0 – Admin menu for instructions on how to perform a cryptographic erase.

I forgot the PIN code for my Smart Card

If you forget your PIN code, you can use the PUK code to restore your data and get access to your KryptoDisk 2

again.

1. Enter a wrong PIN code 5 times to trigger a prompt to enter the PUK code

2. Enter your PUK code to unlock the KryptoDisk 2

3. Reset your PIN code from the Admin menu. Please refer to section 0 – Admin menu for instructions

I want to return the KryptoDisk 2 and the Smart Card to Factory Default

Some situations might require you to instantly zeroize your Smart Card. An example is to reuse the KryptoDisk

2 within the organization. The emergency zeroize function allows you to do this without entering the Admin

menu.

1. While not connected to USB cable, insert your Smart Card into the KryptoDisk 2

2. Power on the device

3. Press and hold the '3', '*' and '#'-keys for at least 1 second until "Card Zeroized" is shown

4. Connect the USB cable and "Zeroize Completed is shown followed by "Please restart.

5. Remove and reconnect the USB cable to verify that the KryptoDisk 2 is reset to Factory Default by

observing that the KryptoDisk 2 shows "Initialize [Y/N]"

The KryptoDisk 2 stops responding when set up as a bootable disk

If booting from the KryptoDisk 2, the operating system might cut power to the USB bus during start-up. To

prevent the KryptoDisk 2 to stop responding it might be necessary to set Keep Alive to 1 second. This will

enable retransmitting the encryption key from the Smart Card to the KryptoDisk 2 after the short loss of

power.

Please refer to section 8 – Admin menu for instructions.

5. Security recommendations

This section contains our recommendations on how to fully utilise the KryptoDisk 2's security features. The

KryptoDisk 2 is an advanced security product capable of providing a very high level of data protection.

However, as with any other product, security can be compromised by human error and wrong use. In this

section, we have outlined some recommendations on how to establish good security habits.

Store the KryptoDisk 2 and the Smart Card separately when not in use

The KryptoDisk 2 relies on a two-factor authentication scheme using a PIN code and a smart card. Effective

protection requires that the authentication factors are kept separate from the device they protect when it is

not in use. To ensure that you do not compromise this protection, we strongly recommend that the Smart

Card is stored separated from the KryptoDisk 2.

Remove Smart Card from the KryptoDisk 2 when in use

We strongly recommend that you remove the Smart Card from the KryptoDisk 2 after the authentication

process is complete, especially when working in a public place. As soon as the "Disk Unlocked" message shows

in the display you can remove the card and store it separately from the KryptoDisk 2.

KRYPTODISK 2 |

SELFKEY