Hiddn coCrypt B Selfkey Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Modem Hiddn coCrypt B Selfkey. Hiddn coCrypt B Selfkey 5 páginas.
Imprimir página8. Make sure you either remember or have stored a copy of your new PIN code in a safe place. This
coCrypt B version has no PUK backup code. If you lose your PIN code you have to zeroize the
device and your stored data will be lost.
9. Like most USB devices the coCrypt B needs to be formatted before first time use. Your computer
screen will show a message asking whether you want to format the disk (the hiddn coCrypt). Press
"Format Disk" (or a similar message) on your computer and then press Start (or OK) on your
computer screen. You will typically get a warning on the screen. Press OK to continue; then wait until
you get the message that the formatting is complete. (Fast or Rapid format operation is ok). (Ask your
IT department if you are unsure about this process). Shall the coCrypt B be used on an Apple®
computer, it may be necessary to format the disk first on a Windows® computer.
10. The coCrypt B initialization process is now completed. Remove the device from your computer. You
may now proceed to section C (Normal Use procedure).
C. Normal Use:
1. Press
to power on. Wait until the display shows "PIN:"
2. Enter the correct PIN code. If you type an error, undo the typo by pressing
Enter
when finished.
3. The display will show "PIN accepted". (If the PIN code is not correct the display will show the
message "PIN not accepted". In that case reenter the correct PIN code).
4. Connect coCrypt B to the computer. It can now be accessed as a normal USB storage device.
5. The coCryptB may be powered off and locked by just removing the device from the computer.
6. If the coCrypt B is powered on without being connected to the computer it will automatically turn
itself off and lock in about 30 seconds provided no keys are being pressed during this period. You may
also power off by keeping the
Notes:
The coCrypt B will be blocked and then zeroized if you enter an incorrect PIN number more than 4
times in a row.
The coCrypt may be set up to allow the use of a PIN code containing either characters or a combination of
characters and digits (in both cases a total of minimum 7 digits or characters). See section H for
information on how this is done.
The coCrypt B contains a rechargeable battery with an advanced control unit for charging the battery
whenever the coCrypt B is inserted in a powered-on PC. However, if the coCrypt B is left unused (and not
connected to a PC) for several months, it may be necessary to charge the internal battery for 1-2 hours
before active use. To do so, just insert the coCrypt B into a USB port of a PC that is turned on and let it
charge for 2-3 hours.
As any type of storage devices may occasionally fail we strongly recommend that you store and back up
any valuable or critical data according to the rules provided by your IT-department (or using at least
two independent storage devices).
D. Change PIN:
1. Press and hold
mom
2. Release the
ent
text "1. System Info".
mom
3. Press
ent
again. The text "2. Change PIN" will appear in the display.
4. Press
to confirm your choice. The display will then show " Old PIN".
CC01-UM-B01-02.12-ENG-01.12.16
pressed for at least 2- 3 seconds.
while momentarily pressing
when the text "Admin menu" appears in the display followed by the
to power on.
. Then press