Dynamatic 4050 Folha de instruções
Procurar online ou descarregar pdf Folha de instruções para Controlador Dynamatic 4050. Dynamatic 4050 13 páginas. With dancer position
Também para Dynamatic 4050: Folha de instruções (15 páginas), Folha de instruções (13 páginas), Folha de instruções (14 páginas)
Imprimir página
Instruction Sheet
IS-539-16
revised 2019
15-533-1016 Panel Mount 4000 (4.3 A Controller)
15-551-1016 Standard Enclosure 4000 (4.3 A Controller)
15-539-0016 Panel Mount 4050 (8 A Controller)
15-553-0016 Standard Enclosure 4050 (8 A Controller)
Model 4000 and 4050 with Dancer Position
Introduction:
These instructions relate specifically to the
following Model 4000 and 4050 controllers
which are assembled for Speed Control with
the Dancer Position modification.
Connection Diagram, schematic diagram,
switch
programming,
connection, adjustment procedure and
recommended spare parts list for these
specific assemblies are contained in this
instruction sheet. Any differences between
theses two controllers are clearly noted.
Use instruction manual IM-130006-83XX
with this instruction sheet for complete
installation, operation and maintenance
instructions.
Caution: Above ground electrical potentials
can be hazardous. Always disconnect
electrical power before working on the
controller.
*Heat sink Assembly, HS1, and its wiring
apply only to the Model 4050 controllers.
These parts are not supplied on Model 4000
controllers. The parts are mounted on the
15-530-5 main 4000 board.
1
plug
wiring
Drive Source International/Dynamatic
7900 Durand Ave Bldg 3 Sturtevant, WI 53177
800-548-2169 •
www.Dynamatic.com