AutomationDirect Productivity2000 P2-16DAL-1 Manual de início rápido - Página 4

Procurar online ou descarregar pdf Manual de início rápido para Sistemas de E/S AutomationDirect Productivity2000 P2-16DAL-1. AutomationDirect Productivity2000 P2-16DAL-1 8 páginas. Analog output

Module Installation
WARNING:
Do not apply field power until
the following steps are completed. See
hot-swapping procedure for
exceptions.
Step One:
Align module
catch with base slot and
rotate module into
connector.
Step Two:
Pull top locking tab
toward module face. Click indi-
cates lock is
engaged.
Step Three:
Attach field wiring using the removable
terminal block or ZIPLink wiring
system.
4
www.productivity2000.com
2
rotate
to seated
position
1
Align
with slot
Locked
Unlocked

QR Code

Use any QR Code reader application to
display the module's product insert.
Caution: If possible, remove field power prior to
proceeding. If not, then EXTREME care MUST be taken
to prevent damage to the module, or even personal injury
due to a short circuit from the live terminal block.
Important Hot-Swap Information
The Productivity2000 PAC supports hot-swap!
Individual modules can be taken offline, removed, and
replaced while the rest of the PAC system continues
controlling your process. Before attempting to use the
hot-swap feature, be sure to read the hot-swap topic in
the programming software's help file or our online docu-
mentation at AutomationDirect.com for details on how to
plan your installation for use of this powerful feature.
Tech Support 770-844-4200