GainSpan GS1011MxP-EVB Series Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Placa-mãe GainSpan GS1011MxP-EVB Series. GainSpan GS1011MxP-EVB Series 12 páginas. Serial to wi-fi evaluation kit

Imprimir página

NSTALLATION

The USB key in the evaluation kit contains multiple SW components that can be installed for

evaluating the various applications on the evaluation board.

System Requirements: PC with Windows XP Service Pack 2 or Windows Vista. with at least one Ethernet port, and a PC with a serial

or USB port. (A single PC can provide both the serial and Ethernet connections, if desired.)

Install Java Runtime Environment

If you have Java Runtime Environment (JRE) Version 6 Update 14 or later, you should be able to

run the GSDemo GUI application that are installed as part of the Eval kit installation. If not, you

can download the current version of JRE from

http://www.java.com/en/download/manual.jsp

or run jre-6uXY-windows-i586-p-s.exe from the USB flash drive received with your

Evaluation Kit, where XY may vary depending on the update provided.

Install Serial Terminal Software

Install the Tera Term serial terminal software (teraterm_utf8-4.58.exe). If you already have tera

term or use a different terminal software, then you can skip this step.

Evaluation Kit Software Installation

Installs the Serial to Wi-Fi application binaries, GSDemo GUI for the temperature and light sen-

sor application and drivers required for serial configuration.

Run evalkit_setup.exe from the USB flash drive. This starts the InstallShield Wizard. Perform

a "Typical" installation, using all default settings. This creates and populates the

C:\GainSpan\EvalKit\X.X.X directory.

Note: Directory names and organization may differ slightly from one release to another; If you

have already installed earlier versions of GainSpan software, the most recent release will be add-

ed in a separate folder.

Copy Sim_terminal.exe from the USB key to the EvalKit directory created in this step. The sim

terminal is a serial terminal with --- TCP/UDP client available from GainSpan. Note that Simple

Terminal requires the .NET framework, 2.0 or above; You can download that .net framework

from

http://www.microsoft.com/downloads/en/default.aspx

USB/UART Cable Driver Installation

Note: If using RS232 (DB9) cable, then this step can be skipped

If USB to UART cable provided with the kit is used, then install the driver for this cable from

C:\GainSpan\S2wEvalKit\1_1_2\drivers\usb_uart directory that was created previous step. The

file is labeled CDM 2.02.04.

RELIMINARY

TEPS FOR

VALUATION

AGE

Serial to Wi-Fi Start Up Guide

OFTWARE

ONFIDENTIAL