DB Drive AMPHIBIOUS APT8RGB-XL Instruções de instalação e manual do proprietário - Página 2

Procurar online ou descarregar pdf Instruções de instalação e manual do proprietário para Altifalantes DB Drive AMPHIBIOUS APT8RGB-XL. DB Drive AMPHIBIOUS APT8RGB-XL 2 páginas. Marine / power sports tower speakers

Imprimir página

WAKEBOARD TOWER MOUNTING

MOUNTING THE BRACKET

(1) Remove the bracket bolts from the top

bracket from the tubbie.

(2) Hold the bottom bracket up to the

mounting surface. Place the top bracket over the

wakeboard tower surface and install the mounting

bolts.

(3) Tighten the bracket bolts as needed to secure the

tubbie bracket on the wakeboard tower.

(4) Once the tubbie has been positioned and secured at the needed position, install the

back-up safety cable around the wakeboard tower. (Fig 1)

Note: Use the supplied hardware to secure the bracket to the mounting surface.

DB Research L.L.P. highly recommends that a certified installation technician installation of tubbie enclosure.If

you choose to perform the installation yourself, it is absolutely necessary that the tubbie be properly mounted in

a well thought out manner. Failure to mount the tubbie properly could present two issues: 1) The

tubbies reliability and performance will suffer due to the movement of the tubbie caused by vibration

on the craft.

2) A unproperly mounted enclosure presents a serious safety hazard especially in rough conditions

where loose mounting bolts could cause the mount to fail.

TO ADJUST THE MOUNTING

ANGLE OF THE TUBBIE:

1. Loosen the round adjustment nut, by turning

it counter clock wise.

2. Swivel tubbie to desired angle.

3. Once the desired angle is reached, retighten

the nut by turning clock wise.

Note: No special tools are required to make the

adjustment since hand tightening is all that is

required for a secure adjustment.

WIRING DIAGRAMS

WEATHER RESISTANT PLUG

AND HARNESS

CONNECTING

YOUR SPEAKER

IMPORTANT:

Connect positive wire to the positive

terminal of your amplifier or receiver.

Connect negative wire to the negative

terminal of your amplifier or receiver

RGB Accent lighting function requires the use of either RGBC-8 (Phone app) or

RGBC-4RF (Remote) Control Modules and DBRGBH10 Harnesses. (Sold separately)

Compatible with:

RGB Marine/Power Sports Audio and RGB Lightbars

Tower Speakers

Speakers

Control all your RGB accent

lights from one controller

LIMITED WARRANTY. What is not Covered. This warranty does not cover fading or discoloration caused by exposure

to sunlightor cleaning with any cleaning chemicals or materials that contain abrasive substances. This warranty is void if DB

Research L.L.P. deems that the product was abused or misused. Abuse causing thermal (burnt voice coil) and/or mechanical

failure, improper installation, negligence, normal wear and tear, excessive or direct exposure to water. The warranty is non

transferable and only applies to the original sale. DB Research L.L.P. is not responsible for any possible damages to a person or

consumer's boat from a product failure. The warranty is void if DB Research L.L.P. deems this product was installed or used

improperly. * Additional warranty information is included on the warranty sheet

LIGHTING SOLUTIONS

Sound Bars

RGB Lightbars

Red

Black

Red

Black