AutomationDirect SureServo2 Manual - Página 4
Procurar online ou descarregar pdf Manual para Controlador AutomationDirect SureServo2. AutomationDirect SureServo2 18 páginas. 110/220 vac drives
Também para AutomationDirect SureServo2: Manual de início rápido (2 páginas), Manual de início rápido (4 páginas)
Imprimir página
Chapter 2: Installation
2.3.1 - Heat dissipation requirements:
In order to have adequate air flow for ventilation, please follow the suggested clearances
when installing one or more servo drives (refer to the following diagrams). Avoid mounting
one servo drive above one another. Keep the bottom of the servo drive clear because the
generated heat rises and causes higher temperature for the drives mounted above.
Note: The diagrams below are not to scale. Please refer to the annotations on the diagrams.
Single Servo Drive
Servo Drive Model
SV2A-2040
SV2A-2075, 2150, 2200, 2300
* Due to the assembly tolerance, the minimum clearance for the servo drive is 1mm.
Page 2–4
Multiple Servo Drives
Operating temperature (Ta) corresponding to
Cooling Method
Natural cooling
Natural cooling and
forced cooling
SureServo2 User Manual – 1st Edition – 05/20/2021
minimum clearance (d)*