8BITDO SN30 Pro Manual - Página 2

Procurar online ou descarregar pdf Manual para Controlador de videojogos 8BITDO SN30 Pro. 8BITDO SN30 Pro 4 páginas.

3. Go to your Windows device's Bluetooth setting, pair with [8Bitdo SF30 Pro] or [8Bitdo SN30

Pro]. LED will become solid when connection is successful.

Controller will auto reconnect to your Windows device with the press of START once it has

been paired

USB Connection: connect the controller to your Windows device via USB Cable after step 1.



macOS

1. Press and hold START+A for 1 second to power on the controller, LEDs 1,2,3 will start to

blink.

2. Press and hold PAIR for 3 seconds to enter pairing mode. LEDs will rotate from left to right.

3. Go to your macOS device's Bluetooth setting, pair with [Wireless Controller]. LED will

become solid when connection is successful.

4. Controller will auto reconnect to your Windows device with the press of START once it has

been paired.

USB Connection: connect the controller to your macOS device via USB Cable after step 1.



Turbo function

1. Hold the button you would like to set turbo functionality to and then press the STAR button to

activate turbo functionality.

2. HOME LED will blink when turbo functionality has been applied successfully.

3. All buttons with Turbo functionality activated will cause the HOME LED to blink, showing

you that Turbo functionality is active on that button.

4. To deactivate turbo function, hold the button with turbo functionality activated press the

STAR button to deactivate turbo functionality. The HOME LED will no longer blink if you

have successfully disabled turbo functionality.

Analog sticks are not included.



This does not apply to Switch.



Battery

Status

Low battery mode

Battery charging

Battery fully charged

·Built-in 480 mAh Li-on with 16 hours of play time.

·Rechargeable via its USB-C cable with 1 – 2 hour charging time.

LED Indicator

POWER LED blinks

POWER LED stays solid

POWER LED turns off