Celestron PowerSeeker 60AZ Manual de configuração rápida - Página 2
Procurar online ou descarregar pdf Manual de configuração rápida para Telescópio Celestron PowerSeeker 60AZ. Celestron PowerSeeker 60AZ 2 páginas. Celestron powerseeker 60: quick setup
Também para Celestron PowerSeeker 60AZ: Manual de instruções (10 páginas), Manual de instruções (9 páginas)
Imprimir página
Quick Set-up Guide [cont]
10
Secure slow motion control rod to telescope
tube by attaching the included bolt and
tightening.
13
Loosen the set screw on the focuser so that it
does not obstruct the inner diameter of the
focuser. Remove the plastic cap covering the
end of the focuser.
16
Remove the lens cap from the front of the
telescope. To observe, look through the
eyepiece as shown above.
For detailed usage information please consult your
11
Locate the finderscope. Remove the knurled
nuts on the threaded posts at the focuser end
of the telescope tube.
14
Locate the diagonal and remove the plastic
covers. Insert the chrome barrel of the
diagonal into the focuser and secure in place
by tightening the set screw.
17
For additional magnification, you can use the
included 3x barlow. Place the barlow in the
diagonal in place of the eyepiece and tighten
set screw -- remove the cap from the barlow.
owner's manual.
12
Orient the finderscope so that the lens window
is facing towards the front of the tube. Place
finderscope over the posts on the tube and
replace knurled nuts.
15
Insert the chrome barrel of the 20mm eyepiece
into the diagonal and tighten the set screw.
18
Insert the chrome barrel of the 20mm eyepiece
into the barlow and tighten the set screw to
secure in place.