Dynamic NXT Manual de instruções - Página 15

Procurar online ou descarregar pdf Manual de instruções para Cadeira de rodas Dynamic NXT. Dynamic NXT 18 páginas. Back supports
Também para Dynamic NXT: Instalação (4 páginas)

Imprimir página
3. Hoofdsteun bevestiging
Het bovenste en middelste segment
van de Armadillo schaal hebben
sleuven voor de bevestiging van de
NXT Multifit hoofdsteun. Kies de
goede plaats voor de juiste
3. Head Rest Mounting
postionering van de hoofdsteun.
3. Head Rest Mounting
The Upper and Middle segments of the MAPS shell have slots to accept mounting hardware
The Upper and Middle segments of the MAPS shell have slots to accept mounting hardware
for the nxt MultiFit Head Rest. Choose the location which provided the best positioning for
the head rest.
UPPER
LATERAL
BOVENSTE
LATERAAL
UPPER
LATERAL
LOWER LATERAL
ONDERSTE LATERAAL
WITH LARGE PAD
MET GROTE PAD
LOWER LATERAL
WITH LARGE PAD
4.
4. Lateral Installation and Adjustment
Upper laterals are held in place by screws B and the Lower laterals by screws E. These
Upper laterals are held in place by screws B and the Lower laterals by screws E. These
screws thread into sliding nuts in slots on the laterals allowing the laterals to be infinitely
screws thread into sliding nuts in slots on the laterals allowing the laterals to be infinitely
adjustable between their most inner and outer positions only limited by the postural
4.
Montage en verstellen van de
adjustable between their most inner and outer positions only limited by the postural
requirements of the occupant of the wheelchair and any structural components of the
lateraal steun
requirements of the occupant of the wheelchair and any structural components of the
wheelchair. Loosening screws B or E allowing the laterals to slide will not affect the
wheelchair. Loosening screws B or E allowing the laterals to slide will not affect the
positioning of the mounting hooks.
De bovenste laterale steunen
positioning of the mounting hooks.
worden op de plek gehouden door
schroef B en de onderste steunen
door schroef E. Deze schroeven
5. Angle Adjustments
zitten vast met schuifmoeren in
5. Angle Adjustments
sleufgaten. Hierdoor zijn de steunen
The Upper and Lower segments of the MAPS
The Upper and Lower segments of the MAPS
traploos instelbaar dat alleen
shell are individually angle adjustable with
shell are individually angle adjustable with
respect to the Middle segment. Loosening
bewerkt wordt door het postuur van
respect to the Middle segment. Loosening
screws G (on both sides of hinge joint) allows
de gebruiker of door de rolstoel. Het
screws G (on both sides of hinge joint) allows
the Upper segment to be tilted forward up to
the Upper segment to be tilted forward up to
40 degrees or backward up to 20 degrees.
losdraaien van schroef B en E heeft
40 degrees or backward up to 20 degrees.
Loosening screws F (on both sides of hinge
geen effect op de positionering van
Loosening screws F (on both sides of hinge
joint) allows the Lower segment to be tilted
joint) allows the Lower segment to be tilted
de montagehaken.
forward or backward up to 30 degrees.
forward or backward up to 30 degrees.
Tightening the screws locks the segment
Tightening the screws locks the segment
preventing a change in angle. Ensure all 8
preventing a change in angle. Ensure all 8
screws are tightened.
screws are tightened.
B
B
E
E
VOORAANZICHT
FRONT VIEW
Head Rest Mounting
The Upper and Middle segments of
the Armadillo shell have slots to
accept mounting hardware for the
NXT MultiFit Head Rest. Choose the
location which provided the best
positioning for the head rest
B
B
Lateral installation and
adjustment
Upper laterals are held in place by
screws B and the lower laterals
by screws E. These screws thread
into sliding nuts in slots on the
laterals allowing the laterals to be
UPPER SEGMENT
infinitely adjustable between their
UPPER SEGMENT
most inner and outer positions only
HINGE JOINT
HINGE JOINT
limited by the postural
requirements of the occupant of
the wheelchair and bij any
structural components of the
HINGE JOINT
wheelchair. Loosening screws B or
HINGE JOINT
E allowing the laterals to slide will
not affect the positioning of the
LOWER SEGMENT
mounting hooks.
LOWER SEGMENT
UPPER
BOVENSTE
LATERAL
LATERAAL
UPPER
LATERAL
LOWER LATERAL
ONDERSTE LATERAAL
WITH LARGE PAD
MET GROTE PAD
LOWER LATERAL
WITH LARGE PAD
E
E
G
G
F
F
15