Dynamic nxt Back Manual de instalação e do utilizador - Página 5

Procurar online ou descarregar pdf Manual de instalação e do utilizador para Cadeira de rodas Dynamic nxt Back. Dynamic nxt Back 20 páginas.

IMPORTANT INFORMATION:

FOLLOW BEFORE INSTALLATION

WEIGHT CAPACITY: The weight capacity of the

300lbs/136kg – 400lbs/182kg on 22"/55cm.

23"/58cm – 29"/ 73cm is 550lbs/250kg with 4 point hardware.

Please note that the Quickfit mounting hardware on the

pre-assembled with the cane clamp in the rear most mounting position

to maximize seat depth of the wheelchair. See Fig. 1 below.

The configuration can be changed by orienting the Quickfit cane clamp

forward, providing a forward mounting position. See Fig. 2 below.

Note: The Quickfit mounting hardware provides 3"/ 7.6cm of depth

adjustment, in front of and behind the back canes.

To set the Quickfit mounting hardware in the forward most position:

•

Remove the cane clamp from the mounting plate

•

Rotate the cane clamp 180° and re-attach it to the mounting plate

•

Install clamp as shown in Fig. 2

FIG. 1: PIN LOCATION FOR ALL BACKS

EXCEPT PEDIATRIC AND ARMADILLO

Please Note: Setting the desired position of the

compromise the stability of the wheelchair.

Be aware that the forward and aft position for the backrest will change

the user's centre of gravity within the wheelchair. A back set in the most

rearward position can significantly reduce the rearward stability of the

wheelchair. In contrast, a more forward back position may reduce the

wheelchair's forward stability.

3 7/8"

FIG. 2: PIN LOCATION FOR PEDIATRIC

AND ARMADILLO BACKS

BACK POST CENTRELINE

nxt

Back is

nxt

Back are

nxt

back may