Gait up Physilog 5 Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Acessórios Gait up Physilog 5. Gait up Physilog 5 17 páginas.
Também para Gait up Physilog 5: Manual do utilizador (12 páginas), Manual do utilizador (17 páginas)

Imprimir página

1. Running package content

2. Get ready with the sensors

2.1 Charging sensors

Physilog

5 are charged via micro USB. Connect the USB cable delivered with the sensors.

Connect the other part to a computer or sector with an adaptor (voltage specification: 5V,

5 must be turned off when charging. Don't charge the Physilog

100 mA). Physilog

temperature is not between 0 ° and 45 °C.

Low battery level is indicated by orange blinking during measurement or by 3 rapid red

blinks when you want to start a new measurement. If the Physilog

discharged, charge at least 30 minutes before using. Battery life estimation is available

when you pair the sensor to the GaitUp application (available on Apple Store and Google

Play Store).

NOTE: Charging problem is indicated by a continuous red light and it could

damage the sensor. In this case try to charge your sensor on another charging

source.

2.2 Sensors Configuration

By default, sensors are configured for running analysis with the PhysiRun Lab.

Nevertheless if you encounter any problem during the analysis you can check the sensor

configuration with the Research Toolkit (Windows version/Mac version, User guide) in the

"Configuration" part. Select your sensors> "Load Config"> Change the configuration>

"Send Config". Configuration for PhysiRun Lab is:

User guide PhysiRun Lab - v1.1.1 Date: 06.05.2019

EPFL Innovation Park, Bat C. CH-1015 Lausanne

5 is completely

Gait Up SA

www.gaitup.com

TVA CHE-145.136.760

5 if the