Automationdirect.com Productivity 2000 P2-15TD2 Manual - Página 4
Procurar online ou descarregar pdf Manual para Unidade de controlo Automationdirect.com Productivity 2000 P2-15TD2. Automationdirect.com Productivity 2000 P2-15TD2 4 páginas. Sourcing dc output
Imprimir página
WARNING:
To minimize the risk of potential safety problems, you
should follow all applicable local and national codes that regulate
the installation and operation of your equipment. These codes
vary from area to area and it is your responsibility to determine
which codes should be followed, and to verify that the equipment,
installation, and operation are in compliance with the latest revision
of these codes.
Equipment damage or serious injury to personnel can result
from the failure to follow all applicable codes and standards. We
do not guarantee the products described in this publication are
suitable for your particular application, nor do we assume any
responsibility for your product design, installation, or operation.
If you have any questions concerning the installation or
operation of this equipment, or if you need additional information,
please call Technical Support at 770-844-4200.
This publication is based on information that was available at
the time it was printed. At AutomationDirect.com® we constantly
strive to improve our products and services, so we reserve the right
to make changes to the products and/or publications at any time
without notice and without any obligation. This publication may also
discuss features that may not be available in certain revisions of
the product.
Removable Terminal Block Specifications
Part Number
P2-RTB
Number of
18 Screw Terminals
Positions
30–16 AWG (0.051–1.31 mm²)
Solid / Stranded Conductor
Wire Range
3/64 in (1.2 mm) Insulation Maximum
1/4 in (6–7 mm) Strip Length
Conductors
"USE COPPER CONDUCTORS, 75°C" or Equivalent.
Screw Driver Width
Screw Size
Screw Torque
2.5 lb∙in (0.28 N∙m)
*Recommend Screw Driver TW-SD-MSL-1
4
www.productivity2000.com
P2-RTB-1
18 Spring Clamp Terminals
28–16 AWG (0.081–1.31 mm²)
Solid / Stranded Conductor
3/64 in (1.2 mm) Insulation Maximum
19/64 in (7–8 mm) Strip Length
0.1 inch (2.5 mm) Maximum*
M2
N/A
N/A
General Specifications
Operating Temperature
Storage Temperature
Humidity
Environmental Air
Vibration
Shock
Field to Logic Side Isolation
Insulation Resistance
Heat Dissipation
Enclosure Type
Module Keying to Backplane
Module Location
Field Wiring
EU Directive
Connector Type (sold separately) 18 Position Removable Terminal Block
Weight
Agency Approvals
*Meets EMC and Safety requirements. See the D.O.C. for details.
Tech Support 770-844-4200
0° to 60°C (32° to 140°F),
-20° to 70°C (-4° to 158°F)
5 to 95% (non-condensing)
No corrosive gases permitted
IEC60068-2-6 (Test Fc)
IEC60068-2-27 (Test Ea)
1800VAC applied for 1 second
>10MΩ @ 500VDC
2600mW
Open Equipment
Electronic
Any I/O slot in a Productivity2000 System.
Use ZIPLink Wiring System or removable terminal
block (sold separately). See "Wiring Options" on
page 2.
See the "EU Directive" topic in the Productivity
Suite Help File. Information can also be obtained
at: www.productivity2000.com
100g (3.5 oz)
UL 61010-1 and UL 61010-2-201 File E139594,
Canada and USA
CE (EN 61131-2 EMC, EN 61010-1 and EN 61010-
2-201 Safety)*